top of page
MudMotors4X4.jpg

mud motors

We offer a fleet of HDD specific mud motors based on high performance motors from the past and improved upon over the last decade then tested in toughest conditions imaginable. When you call for our motors you are not getting a third party motor that we are renting or selling you. These are J.T. Miller team developed motors, tried and true and tough to the core.

We offer 3 different sizes.

5" 

  • 3-1/2' Reg Box bit connection x 3-1/2" IF box top connection​​

  • Optimized for a 6-1/2" or a 6-3/4" Mill Tooth or TCI Tri cone or PDC drill bit

  • Approx. Dimensions: 17' long 1,100 lbs.

  • Recommended 100-250 GPM

  • Recommended 120 normal use hours before rebuild

6-3/4"

  • 4-1/2" Reg. Box or 6-5/8" Reg. Box bit connections x 4-1/2" IF box top connection

  • Optimized for a 8-1/2", 8-3/4", 9-7/8", 10-5/8" or an 11" Mill Tooth or TCI Tri-cone or PDC drill bit

  • Approx. Dimensions: 22' long 1,800 lbs.

  • Recommended 300-600 GPM

  • Recommended 120 normal use hours before rebuild

8"

  • 6-5/8" Reg. Box bit connection x 6- 5/8" Reg. box top connection

  • Optimized for a 10-5/8", 11" or a 12-1/4" Mill Tooth or TCI Tri-cone or PDC drill bit

  • Approx. Dimensions: 22' long 3,100 lbs.

  • Recommended 300-600 GPM

  • ​Recommended 120 normal use hours before rebuild

​

All of our motors run a marine bearing mud lube system that is designed to be tough. You don't need to worry about a little mud getting into your oil with our motors because there is no oil required. They are designed to be lubricated by the mud itself which makes for an exponentially less expensive and more robust platform.

All of our motors run a tungsten carbide and hard metal reinforced kick pad to assist in the speed at which you are able to steer.

All of our motors run a rotor catch. Despite what you may have been told every mud motor has the capability of unscrewing itself if stalled then then pulled off the face without disengaging the mud pump. If this happens without a rotor catch then you could loose your hole. The rotor catch offers a level of insurance for you to be able to trip the damaged motor and and continue.

Our motors are on the rack and ready to go.

​

Call today to get your mud motors on the road 936.447.2929

bottom of page